Thanks to Globe Gas for all of the coverage on @Twitter over the last week or so. Simply posting images of their brilliant installation of the Disman Profisel 18mm high density cement boards and 12mm multilayer pipe underfloor heating system really got the message out there. Lots of comments and positive feedback, both from the Twittersphere and from Lee and Steve the installers themselves.
@lee84_swifty UFH overlay system from @bhivesupplies assisted by my new apprentice 🤣🤣 Steve @BoilerfitNW my first UFH so quite a proud moment for me. @warmyourhome @yourserviceldn
For more information on this system and all of the other options avaialble in our range, please get in touch…. 01245 860589 or email your drawings to email@example.com
B-Hive Supplies are proud to be associated with Cool To Be Kind, a Chelmsford based community group focused on helping those of us who sleep rough on our streets.
Following last years success, we are again reaching out to our community to request your help. We need your ruck sack contributions!!!
Cool To Be Kind aims to provide help and support to rough sleepers in the South East. We offer this help and support via our outreach teams, distributing food and clothing twice a week and offering friendship and regular contact. The rucksacks are an essential part this outreach and with the winter weather fast approaching, your contribution could make an enormous and direct difference to real people in our region.
What are we looking for?
Tooth paste & Tooth Brushes
Tins of food
If some or all of these items could be placed within a ruck sack in advance, that would be fantastic. If you would like to contribute just a couple of items, we’d be more than grateful. We can then package them as required. (Please note, knives, forks, aerosols and perishable foods cannot be used).
Contributions can be sent to us at B-Hive Supplies in Chelmsford, or if you are unable to drop them of, we can arrange collection.
Delivery Address: B-Hive Supplies – Unit 6 Beehive Business Centre, Beehive Lane, Chelmsford, Essex. CM2 9TE (Please call in advance to give us the heads up – 01245 860589)
For more information about Cool To Be Kind and the work we do, please go to www.c2bk.co.uk
So, we seem to be having quite a few “Do you do….?” questions regarding our underfloor heating offer. Just to clear things up, we decided to borrow a few images from one of our suppliers to outline the full breadth of our offer….. By the way, if you don’t see what you need, get in touch, we’ve pretty much got a solution for every scenario.
If you have any questions or would like data sheets for your own sales or hand over pack, please let us know.
Otherwise, keep on fitting, and we hope to hear from you soon.
Morning all, just to let you all know we’ve just placed the all new REMS tooling offer live on the B-Hive site.
Robust, reliable, well priced and available form UK stock, these tools really are the ideal companion to our Mulilayer Pipe & Press-Fit (MLCP), Pegler Yorkshire Xpress and Buteline plumbing offerings. All jaw profiles also available. If you don’t see the jaw profile you need on the site, please get in touch and we’ll price it for you there and then.
The Disman Aqualay Underfloor System is easy to install.
Aqualay Master Panels are used to cover the majority of the floor area to be heated. Universal Panels are used as pipe
return ends and for areas with complex layouts allowing the pipe route to be positioned without compromise.
The panels can be fitted onto a wide range of substrates including concrete, screed, asphalt, chipboard and plywood. These panels are not designed to span across floor joists and must be fully supported by the floor which they are to cover. The panels
can be fixed using flexible cement based tile adhesive or low expansion PU Foam with screws and washers. The panels provide
an insulated floor surface with pre-set channels for pipe work.
When the water pipes have been fitted and tested, preparation of the Disman Aqualay surface for the final floor finishes can begin.
The Disman Aqualay Underfloor Heating System Solution is a high performance pipe carrier panel designed for use with Wet/water based systems.
The Disman Aqualay panels are produced with pre-set pipe channels set *100mm, and 150mm centres and comprise of 3 different panel options;
Disman Aqualay Master Panel
Disman Aqualay Universal Panel
Disman Aqualay Multiflow Panel
Each panel offers uniquel designed benefits that make Disman Aqualay a superlative system for underfloor heating.Disman Aqualay over-lay panels are designed to provide a durable overlay pipe routing system for use with low pressure water heating and cooling systems. Disman Aqualay provides benefits such as insulation against downward heat loss, heat transfer across pipework centres, improves warm up time to floor finishes and provides controlled spacing for pipe-work. The Disman Aqualay is available with pipe channel centres set at *100mm for 12mm diameter pipe and with 150mm centres for Disman underfloor heating pipe diameters of 12mm and 16mm.
Disman Aqualay Master Panels are manufactured using high density extruded XPS as its core element finished with a hard wearing cementitious surface. Running through the body of each Master Panel is a series of highly effective heat transfer cores, manufactured from a unique conducting cement compound designed to transfer heat from the water pipes to the panel surface. The patented Master Panel is unique in structure, providing insulation against downward heat loss whilst at the same time effectively transferring heat from the water pipe to the floor surface.
Disman Aqualay Universal Panels are manufactured using a lightweight polycement based compound as its core element. These panels provide installers and designers total flexibility for complex pipe route layouts. Disman Aqualay Universal Panels effectively transfer heat across the floor surface, however they don’t offer the same level of insulation as the Disman Aqualay Master Panel.
Disman Aqualay Multiflow Panels are manufactured using high density polystyrene with cement reinforced surfaces. The
eight channels of the Multiflow are designed to retain heat within the water pipe ensuring heated water is directed efficiently to the required heating zone.
“From start to finish these guy had everything covered. They were able to answer all of my questions, provide the type of system I wanted, create the design and supply the kit without any issues at all. I’d be more than happy to put my name to any recommendation for B-Hive Underfloor heating. Many thanks guys.”
XXX Plumbing & Heating
Got to say massive thanks to @bhivesupplies. We needed a couple of mlcp fittings and were miles from any suppliers so he got in the van himself and dropped them down. Top service. Great products too. Cheers Team B-Hive!