REMS AKKU Press Li-LON 14.4v
DescriptionREMS Akku-Press – universal up to Ø 110 mm. Secure crimping in seconds. Automatic locking of pressing tongs.
System advantage Only one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes.
All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systems Complete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170).
Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fitting system. Thus perfect system conformity, safe press jointing. Design Compact, handy, light. Drive unit with battery only 4.3 kg. Works anywhere, free-hand, overhead, in confi ned areas. Optimum weight distribution for single-hand operation.
Ergonomically shaped housing with recessed grip. Integrated LED work light for illuminating the work place. Swivelling pressing tongs seat. Secure seating of pressing tongs/adapter tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings. For battery and corded operation. Electronic charging status check with fl at battery protection and charging status indicator with 2-coloured LED.
Pressing operation by touch-control For reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. Acoustic signal after successful completion of pressing operation. The pressing tongs remain in a closed position until reset button is pushed and releases. This way, the perfect pressing joint (completely closed pressing jaws) can be observed. Drive Enormous thrust and pressing force for fast and perfect press jointing.
Thrust force 32 kN. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. Battery or mains operation Li-Ion PLUS technology.
Highly resistant Li-Ion 14.4 V battery with 3.0 Ah capacity, for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery for approx. 270 pressings Viega Profi press DN 15 per battery charge. Total discharge and overload protection with single cell monitoring.
Temperature monitoring during the charging process.
Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion battery 14.4 V, as accessory. Supply format REMS Akku-Press Basic-Pack.
Cordless radial press with switch-off signal for producing pipe pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/ pressing rings. Swivelling pressing tongs seat with automatic locking. Electrohydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric recipro cating pump and compact high power hydraulic system. Safety tip switch. Integrated LED work light. Battery Li-Ion 14.4 V, 3.0 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 65 W. In sturdy steel case.
Write an online review and share your thoughts with other shoppers!