REMS Mini Press ACC Jaws M Profile
DescriptionREMS pressing tongs Mini / REMS pressing rings Mini
Very compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948).
High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective press-fitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.
Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.
Select pressing tongs Mini yourself!
Search for the required press-fitting system in the opposite table and select the correct pressing tongs size./ pressing ring size. Please note that press-fitting systems for gas installations may only be pressed with the pressing tongs Mini / pressing rings which are highlighted in yellow in the table.
Traceability according to EN 1775:2007
REMS pressing tongs Mini /pressing rings Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the press-fit connection even after the pressing process.
With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of press-fitting systems for gas.
Write an online review and share your thoughts with other shoppers!